Your position: Home>>News center>>Product Knowle...>

Grade and Standards of screw spike


Source: Dan   Update tme: 2014-03-17   Visitor: 

Standards of screw spike

Grade description (technical requirements) of ASTM
1. AREA 4-1.4  in 1991 class 2 (ASTM 1183 Class2)
  ①Tensile strength (PSI)≥760MPa
  ②Yield strength≥552MPa
  ③Elongation2"≥12%
  ④Reduction of cross section≥25%
⑤Requirements of cold blending: 45°, no cracking. Diameter of blending core= diameter of screw
  ⑥Raw material: 35#, 45#, 20MnTiB, etc

2. AREA 1991 standard   Strength Grade:SAE J429 Class 5
①1/4"~1"  Tensile strength (PSI)≥828Mpa, Yield strength≥635MPa;
②>1"~1-1/2" Tensile strength (PSI)≥725Mpa, Yield strength≥559MPa;
③Elongation2"≥14%
④Reduction of cross section≥35%
⑤Requirements of cold blending: 45°, no cracking. 
Diameter of blending core= diameter of screw
⑥Surface hardness: HRC: size of 1/4~1"≤34;  size of >1"~1-1/2"≤30;
⑦Core hardness: HRC: size of 1/4~1": 25~34;  size of >1"~1-1/2"≤30 
(no requirements with the minimum hardness when examination);
⑧Raw material: 45#, 20MnTiB, 40Cr, etc
3. AREA 1991 standard    Strength Grade:SAE J429 Class 8
①Tensile strength (PSI)≥1035.2MPa
②Yield strength≥897.2MPa
③Elongation2"≥12%
④Reduction of cross section≥35%
⑤Requirements of cold blending: 45°no cracking. 
Diameter of blending core= diameter of screw
⑥Surface hardness: HRC:≤39;
⑦Core hardness: HRC: 33~39; 
(no requirements with the minimum hardness when examination);
⑧Raw material: 45#, 35CrMo, 42CrMo, etc
Grade description (technical requirements) of GB, DIN, ISO
1. Grade: Class 4.6
①Raw material: Q235, Q275, 20#
②Mechanical capacity:
        Tensile strength (PSI)≥400MPa
        Yield strength≥240MPa
        Elongation≥22%
        Brinell Hardness HB114-209

2. Grade: Class 4.8
①Raw material: Q235, Q275
②Mechanical capacity:
        Tensile strength (PSI)≥420MPa
        Yield strength≥340MPa
        Brinell Hardness HB124-209

3. Grade: Class 5.6
①Raw material: 35#  Q345B(16Mn)
②Mechanical capacity:
        Tensile strength (PSI)≥500MPa
        Yield strength≥300MPa
        Elongation≥20%
        Brinell Hardness HB147-209

4. Grade: Class 5.8
①Raw material: 35#, 45#  
②Mechanical capacity:
        Tensile strength (PSI)≥520MPa
        Yield strength≥420MPa
        Brinell Hardness HB151-209

5. Grade: Class 6.8
①Raw material: 45#  
②Mechanical capacity:
        Tensile strength (PSI)≥600MPa
        Yield strength≥480MPa
        Brinell Hardness HB181-238

6. Grade: Class 8.8
①Raw material: 45#  40Cr  20MnTiB
②Mechanical capacity: 
     A) Diameter≤16
Tensile strength (PSI)≥800MPa
        Yield strength≥640MPa
        Elongation≥12%
       Reduction of cross section≥52%
Rockwell hardness HRC22-32
Brinell Hardness HB238-304
B) Diameter>16
Tensile strength (PSI)≥830Mpa
Yield strength≥660MPa 
Elongation≥12% 
Reduction of cross section≥52%
Rockwell hardness HRC23-34
Brinell Hardness HB242-318

7. Grade: Class 10.9
①Raw material: 40Cr, 20MnTiB, 35CrMo, 42CrMo
②Mechanical capacity: 
Tensile strength (PSI)≥1040MPa
        Yield strength≥940MPa
        Elongation≥9%
       Reduction of cross section≥48%
Rockwell hardness HRC32-39
Brinell Hardness HB304-361

More information about screw spike is available at www.railway-fastener.com/

Products List

Hover see more.


Rail Screw Spikes
Rail Track Spikes
Rail Fish Bolts
Rail Clip Bolts
Rail Track Bolts
Special Rail Bolts
Nuts and washers
Rail clips
Rail clamps
Cast and Forged product
Plastic product
Steel Rail and sleeper

Contact us

  • Shanghai Honge  Industry Co., Ltd.
  • Tel:0086-21-60499668
  • Fax:0086-21-58662068
  • Email: sales@ifastening.com

Need help?

or Email us :